New member, need some tips
- Thread starter ejb4791
- Start date
davewelch2000
New Member
whats the problem looks like you got it
bluegoatwoods
Well-Known Member
It looks as though you've reversed your rear wheel to use the chainrings for your drive.
Can it possibly work that way? Have you had success with it?
Can it possibly work that way? Have you had success with it?
Stan4d
New Member
srdavo
Well-Known Member
ballpark figures:
The good news--your current set up will run 542 mph.
The bad news--you'll have to pedal up to 515 mph before the engine will begin to pull the bike.
Do a search for "gear reduction" over here: http://www.motoredbikes.com/forumdisplay.php?f=86 If you don't find what you are looking for.... start a thread here & ask.
have a look here: http://www.motoredbikes.com/showpost.php?p=78789&postcount=47
(Rube Goldberg woulda been proud)
The good news--your current set up will run 542 mph.
The bad news--you'll have to pedal up to 515 mph before the engine will begin to pull the bike.
Do a search for "gear reduction" over here: http://www.motoredbikes.com/forumdisplay.php?f=86 If you don't find what you are looking for.... start a thread here & ask.
have a look here: http://www.motoredbikes.com/showpost.php?p=78789&postcount=47
(Rube Goldberg woulda been proud)
