Nirve Switchblade project finished.

Jerbyrd666

New Member
Local time
12:46 AM
Joined
Apr 6, 2020
Messages
19
Finally Finished my Nirve Switchblade!! It was a hell of a project as I'm sure some of you know all too well... I completely avoided the typical chain tire clearance issue by using a 26 x 2.125" rear wheel Instead of the stock 24 x 3" wheel that came with the bike and a LOT of headaches avoided!! Also have a CDH sprocket Adapter with a 36 tooth sprocket, Some BadAss Chopper/Bobber style "Z" Bars and the motor I believe is a 49cc Flying Horse kit I picked up used for $60 on Offerup. And The Bike needed a Lil modification as well so I welded another tube from the bottom of the seat tube above the cranks and connecting to the downtube to get the motor where I wanted it . Also I cut the headtube off and brought the bottom in a couple of inches so the Forks weren't too raked out and it handles SO MUCH BETTER NOW!! LEMME KNOW WHAT YOU GUYS THINK THOUGH . ANY SUGGESTIONS ON On A Selling price would be greatly appreciated as well .
 

Attachments

  • 20220609_131529.jpg
    20220609_131529.jpg
    235.9 KB · Views: 155
  • 20220609_131529.jpg
    20220609_131529.jpg
    235.9 KB · Views: 157
  • 20220609_131536.jpg
    20220609_131536.jpg
    260.9 KB · Views: 153
  • 20220609_131548.jpg
    20220609_131548.jpg
    265.5 KB · Views: 152
  • 20220609_131603.jpg
    20220609_131603.jpg
    223.1 KB · Views: 150
  • 20220609_131617.jpg
    20220609_131617.jpg
    244.3 KB · Views: 141
  • 20220609_131634.jpg
    20220609_131634.jpg
    213.5 KB · Views: 140
  • 20220609_131642.jpg
    20220609_131642.jpg
    204.4 KB · Views: 139
  • 20220609_131650.jpg
    20220609_131650.jpg
    255.1 KB · Views: 152
Back
Top