K Kman123 Member Local time 4:53 AM Joined Apr 28, 2018 Messages 64 Jul 14, 2019 #1 So what are the reasons a 2 stroke would run great but, not idle?
Lukesky36 Active Member Local time 4:53 AM Joined Oct 3, 2018 Messages 442 Jul 15, 2019 #2 just adjust your idle screw and or fuel mixture
CaptainLunatik Member Local time 1:53 AM Joined May 28, 2019 Messages 182 Jul 15, 2019 #3 Ok so ive got my idle screw in as far as it goes and mine wont idle either
Lukesky36 Active Member Local time 4:53 AM Joined Oct 3, 2018 Messages 442 Jul 15, 2019 #4 adjust your float or fuel mix/jet if that doesn't work try another carburetor if all else fails
K Kman123 Member Local time 4:53 AM Joined Apr 28, 2018 Messages 64 Jul 15, 2019 #5 Went from nt carb to hp and same issue. Will try the float idea.
I inspectorcritic Well-Known Member Local time 2:53 AM Joined Dec 13, 2015 Messages 1,889 Jul 20, 2019 #6 You might have an air leak on the carb fasten to the motor or simply turn your smoke adjustment screw to the right 1 turn.
You might have an air leak on the carb fasten to the motor or simply turn your smoke adjustment screw to the right 1 turn.
Vikingimike01 Well-Known Member Local time 10:53 AM Joined Jul 1, 2018 Messages 1,492 Location Hungary Jul 20, 2019 #7 Does it still happen when you roll at 20km/h+, and then pull the clutch? When you are rolling downhill or something. If it idles then you need to adjust your clutch i had this problem
Does it still happen when you roll at 20km/h+, and then pull the clutch? When you are rolling downhill or something. If it idles then you need to adjust your clutch i had this problem
K Kman123 Member Local time 4:53 AM Joined Apr 28, 2018 Messages 64 Jul 20, 2019 #8 inspectorcritic said: You might have an air leak on the carb fasten to the motor or simply turn your smoke adjustment screw to the right 1 turn. Click to expand... Where is the smoke adjustment screw? Or are you just messing with me?
inspectorcritic said: You might have an air leak on the carb fasten to the motor or simply turn your smoke adjustment screw to the right 1 turn. Click to expand... Where is the smoke adjustment screw? Or are you just messing with me?
gary55 Well-Known Member Local time 1:53 AM Joined Nov 27, 2012 Messages 4,029 Location Prescott, AZ Jul 20, 2019 #9 No smoke adjustment. Raise the clip on the needle to the top notch.
K Kman123 Member Local time 4:53 AM Joined Apr 28, 2018 Messages 64 Jul 20, 2019 #10 gary55 said: No smoke adjustment. Raise the clip on the needle to the top notch. Click to expand... Im using the hp carb. There is no clip.
gary55 said: No smoke adjustment. Raise the clip on the needle to the top notch. Click to expand... Im using the hp carb. There is no clip.