No power

[DAMIEN1307]

What is the altitude above sea level in feet if you can so i dont have to convert from metrics...lol.

 

[Zac]

What is the altitude above sea level in feet if you can so i dont have to convert from metrics...lol.

4,904

 

[DAMIEN1307]

Put the "C" clip at the very top groove of the needle valve...im at a 4500 ft level myself and mine runs perfectly at that altitude.

 

[Zac]

Ok I'll try that, and what jet should I use?

 

[DAMIEN1307]

leave it at the stock jet for now and just try out the c clip adjustment and try to run it first and lets see if thts not the problem right there.

Where is that c clip right now???

 

[Zac]

Il check, also I won't be able to test tonight, it's dark out and I don't want to take out my bike, so I'll test tomorrow

 

[DAMIEN1307]

Also make sure that your petrol/oil ratio is at 32:1...4 ounces of 2 cycle oil to one gallon of petrol.

Ps...You still didnt tell me where your C clip is located on the needle valve at this moment.

 

[Zac]

I'm running 32:1, and I'm working on getting that top piece off, I was just putting my float and bowl back on. Just making sure, the float on the nt isn't supposed to attach to anything, it simply just "floats"?

 

[DAMIEN1307]

Just making sure, the float on the nt isn't supposed to attach to anything, it simply just "floats"?

it just has that forked metal arm that keeps it from bobbin around too much

 

[Zac]

My pin has 4 slots, and my clip is on 3/4, or the third highest