No power

Karl Snarl

Well-Known Member
Local time
5:14 AM
Joined
Sep 20, 2019
Messages
5,951
Location
Chunky Monkey Mole Hole
Lol you dont have to listen to me! I dont know what I'm even doing or talking about.🤪 isn't this MB anonymous?
You can make gaskets like that. Beer cans make head gaskets too. Just sand off the paint and plastic coating first. A pair of craft snippy snippy snips will cut through it easy as pie. Use a fosters can or Guinness for thicker.
 

DieselTech

Well-Known Member
Local time
5:14 AM
Joined
Sep 18, 2021
Messages
4,768
You can make gaskets like that. Beer cans make head gaskets too. Just sand off the paint and plastic coating first. A pair of craft snippy snippy snips will cut through it easy as pie. Use a fosters can or Guinness for thicker.
Aluminum beer bottles are .013" thick, bullfight specifically!!!😂🤣
 

wan37

Well-Known Member
Local time
5:14 AM
Joined
Oct 12, 2011
Messages
1,445
Location
Illinois
You sure your choke lever isn’t vibrating up. When you warm and you push it down. I’ve seen that happen. Sounds like that’s what’s happening.Here’s another thing if it’s and Nt carburetor take filter off. Then move choke lever up and down while watching the choke door, if not moving and staying closed tighten the nut a little . Just watch the door after you tighten it you can over tighten it too.
 
Top