DAMIEN1307 Moderator Staff member Local time 8:35 PM Joined Jul 23, 2020 Messages 14,260 Location Alamogordo, NM, USA Feb 13, 2022 #11 What is the altitude above sea level in feet if you can so i dont have to convert from metrics...lol.
What is the altitude above sea level in feet if you can so i dont have to convert from metrics...lol.
Z Zac Active Member Local time 7:35 PM Joined Dec 19, 2021 Messages 180 Feb 13, 2022 #12 DAMIEN1307 said: What is the altitude above sea level in feet if you can so i dont have to convert from metrics...lol. Click to expand... 4,904
DAMIEN1307 said: What is the altitude above sea level in feet if you can so i dont have to convert from metrics...lol. Click to expand... 4,904
DAMIEN1307 Moderator Staff member Local time 8:35 PM Joined Jul 23, 2020 Messages 14,260 Location Alamogordo, NM, USA Feb 13, 2022 #13 Put the "C" clip at the very top groove of the needle valve...im at a 4500 ft level myself and mine runs perfectly at that altitude.
Put the "C" clip at the very top groove of the needle valve...im at a 4500 ft level myself and mine runs perfectly at that altitude.
Z Zac Active Member Local time 7:35 PM Joined Dec 19, 2021 Messages 180 Feb 13, 2022 #14 Ok I'll try that, and what jet should I use?
DAMIEN1307 Moderator Staff member Local time 8:35 PM Joined Jul 23, 2020 Messages 14,260 Location Alamogordo, NM, USA Feb 13, 2022 #15 leave it at the stock jet for now and just try out the c clip adjustment and try to run it first and lets see if thts not the problem right there. Where is that c clip right now???
leave it at the stock jet for now and just try out the c clip adjustment and try to run it first and lets see if thts not the problem right there. Where is that c clip right now???
Z Zac Active Member Local time 7:35 PM Joined Dec 19, 2021 Messages 180 Feb 13, 2022 #16 Il check, also I won't be able to test tonight, it's dark out and I don't want to take out my bike, so I'll test tomorrow
Il check, also I won't be able to test tonight, it's dark out and I don't want to take out my bike, so I'll test tomorrow
DAMIEN1307 Moderator Staff member Local time 8:35 PM Joined Jul 23, 2020 Messages 14,260 Location Alamogordo, NM, USA Feb 13, 2022 #17 Also make sure that your petrol/oil ratio is at 32:1...4 ounces of 2 cycle oil to one gallon of petrol. Ps...You still didnt tell me where your C clip is located on the needle valve at this moment.
Also make sure that your petrol/oil ratio is at 32:1...4 ounces of 2 cycle oil to one gallon of petrol. Ps...You still didnt tell me where your C clip is located on the needle valve at this moment.
Z Zac Active Member Local time 7:35 PM Joined Dec 19, 2021 Messages 180 Feb 13, 2022 #18 I'm running 32:1, and I'm working on getting that top piece off, I was just putting my float and bowl back on. Just making sure, the float on the nt isn't supposed to attach to anything, it simply just "floats"?
I'm running 32:1, and I'm working on getting that top piece off, I was just putting my float and bowl back on. Just making sure, the float on the nt isn't supposed to attach to anything, it simply just "floats"?
DAMIEN1307 Moderator Staff member Local time 8:35 PM Joined Jul 23, 2020 Messages 14,260 Location Alamogordo, NM, USA Feb 13, 2022 #19 Zac said: Just making sure, the float on the nt isn't supposed to attach to anything, it simply just "floats"? Click to expand... it just has that forked metal arm that keeps it from bobbin around too much
Zac said: Just making sure, the float on the nt isn't supposed to attach to anything, it simply just "floats"? Click to expand... it just has that forked metal arm that keeps it from bobbin around too much
Z Zac Active Member Local time 7:35 PM Joined Dec 19, 2021 Messages 180 Feb 13, 2022 #20 My pin has 4 slots, and my clip is on 3/4, or the third highest