No power

Lol you dont have to listen to me! I dont know what I'm even doing or talking about.🤪 isn't this MB anonymous?
You can make gaskets like that. Beer cans make head gaskets too. Just sand off the paint and plastic coating first. A pair of craft snippy snippy snips will cut through it easy as pie. Use a fosters can or Guinness for thicker.
 
You can make gaskets like that. Beer cans make head gaskets too. Just sand off the paint and plastic coating first. A pair of craft snippy snippy snips will cut through it easy as pie. Use a fosters can or Guinness for thicker.
Aluminum beer bottles are .013" thick, bullfight specifically!!!😂🤣
 
You sure your choke lever isn’t vibrating up. When you warm and you push it down. I’ve seen that happen. Sounds like that’s what’s happening.Here’s another thing if it’s and Nt carburetor take filter off. Then move choke lever up and down while watching the choke door, if not moving and staying closed tighten the nut a little . Just watch the door after you tighten it you can over tighten it too.
 
Back
Top