Noob with a 4-stroke engine problem... help a brother out?

Bikewing_4141

New Member
Joined
Jun 29, 2019
Messages
1
Hi All,

First time post here... my 4 stroke engine is having a weird start up issue for a new bike.. I've found the noise, identified the issue, buuuuuuuuut I don't have any experience with tools whatsoever.

Here is a link to the bike:https://heliobikes.com/products/superbike-7g-motorized-bicycle . --> (will never buy from these guys again)

Here is my problem:

The middle allen bolt doesn't come out, when I rotate it, it turns the engine over and over and over and over continuously with no effect...

What should I do?
 


Old Busted Hotness

Active Member
Joined
Jul 2, 2018
Messages
307
All you have to do is stop the crankshaft. Then the allen bolt will come out. Remove the starter and use a 17mm socket to hold the crank while you undo the allen bolt.

While you're wrenching on it, you may want to level the engine mounting plate. It'll run better and oil properly.
 
Top