Regalgse00
Active Member
- Local time
- 12:27 PM
- Joined
- Jul 9, 2020
- Messages
- 289
So I have a new build. The bike did run. But right now. The back wheel doesn’t lock up. Like there’s no compression or something. I was messing with the clutch adjusting the star nut before. And I took the pressure plate off cause there was a little grease on the clutch pads from assembly a bit and I was cleaning it. And I scuffed the back side of the pressure plate to try and grab it better. But now when I go to start it and I release the clutch. The back wheel doesn’t lock up like there no compression or something. Any ideas ?