Oko carb from zeda

[John Callahan]

Anyone have experience with the 21mm oko carb from zeda? I currently have the stock NT. I'm coming from 4 strokes so I don't have that much experience with after market carbs. If you have any other recommendations let me know too.

The link:

https://www.zedamotorsports.com/sho...8mm-oko-flat-side-carb-w-slash-velocity-stack

 

[butre]

it's a good carb, same thing they use on a honda dio. only problem is it won't fit your stock intake. it uses I think a 35mm spigot, whereas the stock carb I believe is a 16mm slip. hot dog down a hallway. it does fit those dio reed cylinders good though.

 

[John Callahan]

Thank you sir

 

[6blueoval9]

That carb works with some of the reed intakes they sell... You would think 21mm would be too big but if that's the carb they used on one of their YouTube videos with just the mz65 pipe , reeds and carb on an otherwise stock zeda 80 motor then it works very well.