Only gas no 2stroke additive.

xSH0CKERJx

Active Member
Joined
Jul 27, 2018
Messages
428
Will this hurt my engine. Will it run at all? I run a 50 : 1 mix usually but have no ethanol shield.
 


mark20

Active Member
Joined
Sep 26, 2018
Messages
441
Will this hurt my engine. Will it run at all? I run a 50 : 1 mix usually but have no ethanol shield.
YES IT WILL, DONT DO IT.
it will run but your engine will have no lubirication becuase its a 2 stroke, it will sieze and DESTROY YOUR ENGINE!!!
PLEASE DONT DO IT!!
if you have to, use some 10w-30 oil
 

junglepig

Active Member
Joined
Oct 30, 2018
Messages
218
Keep your gas fresh and you won't need any special additive for dealing with ethanol.
Not exactly sure what you're asking though.
 

junglepig

Active Member
Joined
Oct 30, 2018
Messages
218
YES IT WILL, DONT DO IT.
it will run but your engine will have no lubirication becuase its a 2 stroke, it will sieze and DESTROY YOUR ENGINE!!!
PLEASE DONT DO IT!!
if you have to, use some 10w-30 oil
Yeah, if you're asking about running with no oil, yes it will run fine for a few minutes, and then die when all the oil that is currently on your bearings is washed out by the gasoline.
 

mark20

Active Member
Joined
Sep 26, 2018
Messages
441
Yeah, if you're asking about running with no oil, yes it will run fine for a few minutes, and then die when all the oil that is currently on your bearings is washed out by the gasoline.
i thought he was about to run the engine with no oil, i just wanted to be sure.
ethinal shield makes a fuel stabilzer but its also makes 2 cycle oil .
if its the staiblizer it will run fine.
oil, say good bye to your engine
 

junglepig

Active Member
Joined
Oct 30, 2018
Messages
218
i thought he was about to run the engine with no oil, i just wanted to be sure.
ethinal shield makes a fuel stabilzer but its also makes 2 cycle oil .
if its the staiblizer it will run fine.
oil, say good bye to your engine
I see, I didn't recognize that "ethanol shield" was a brand/product line. "Ethanol Shield" might have clued me in...:D

Punctuation is way too much to expect from a sparky!:ROFLMAO:

Go ahead, call me an elitist, or worse. I can take it!
 

mark20

Active Member
Joined
Sep 26, 2018
Messages
441
I see, I didn't recognize that "ethanol shield" was a brand/product line. "Ethanol Shield" might have clued me in...:D

Punctuation is way too much to expect from a sparky!:ROFLMAO:

Go ahead, call me an elitist, or worse. I can take it!
this isnt the welding forum, some one said i should throw away my welder and buy a 1800$ one just to get good welds :ROFLMAO:
heres the one they reccomended for a "beginner"
https://www.homedepot.com/p/Everlast-250-Amp-PowerMTS-250S-IGBT-Digital-Inverter-DC-MIG-TIG-Stick-Multi-Process-Welder-HF-Lift-TIG-Start-240V-PowerMTS-250S/205350927
 

xSH0CKERJx

Active Member
Joined
Jul 27, 2018
Messages
428
I know some of you run like a 32:1 mix but since I use a 50:1 mix I was just curious if I would ruin my engine by running straight up gasoline. You know when you get a gallon of gas, the guy before you could have got that super premium unleaded... someone had said once that in the tube from the gas nozzle there could be like .7 of a gallon in there so I was just a little concerned because I have ran like a 70:1 mix when I was low on that product ethanol shield but won't any 2-stroke oil work? And if I do use a 10 to 30 w oil how much of that should I use per gallon of gas?
 
Joined
Nov 2, 2018
Messages
53
2 weeks ago I ran out of gas, the gas station didn't have 2stroke ran 2 miles at not much more than idle without it you could hear the difference after a mile and if I had went 2 more miles may have blown the engine.
 

MotorBicycleRacing

Well-Known Member
Joined
Jul 3, 2008
Messages
2,288
I know some of you run like a 32:1 mix but since I use a 50:1 mix I was just curious if I would ruin my engine by running straight up gasoline.
Try that and let us know what happens . . . . . . .
also try sticking a knife in an electric outlet while standing in a pool of water you trump troll.
 
Top