Parts are flopping around like a crappie

INTP_ty

Active Member
Joined
Sep 25, 2017
Messages
421
So I’ve decided that I want to keep the chain guard. I’m in need of a 1” front engine mount adapter. Anyone have a link or if you’re a vendor, shoot me a PM. & will I need shims?


The tank and chain tensioners slide around this small 1” tubing like nothing.
 

Attachments



Vikingimike01

Active Member
Joined
Jul 1, 2018
Messages
878
Oh, that type of bike. Well, you'll need to use the adapters to install. It will be really hard tho. Also, if your chain idler thingy is flapping around, you should get the one that holds it with 4 bolts instead of 2. It's like this:
88728


And then you can put a thick rubber/leather sheet under it for more grip. Worked for me!
 

darwin

Well-Known Member
Joined
May 26, 2008
Messages
3,279
So I’ve decided that I want to keep the chain guard. I’m in need of a 1” front engine mount adapter. Anyone have a link or if you’re a vendor, shoot me a PM. & will I need shims?


The tank and chain tensioners slide around this small 1” tubing like nothing.
Looks like a girls bike!
 

INTP_ty

Active Member
Joined
Sep 25, 2017
Messages
421
Okay this part doesn’t fit on this bike either. I’m pretty sure with my last bike, The sprocket sat right on the spokes. With this one, it hits the dust cap. It’s definitely not even close to the spokes.


Hole saw??? I know someone ran into this problem.

I think I might just buy a different bike
 

Attachments

Last edited:
Top