They should be 9/16", as the pedals on my 2005 NE% are 9/16". The bike should accept any 9/16" pedals. I fittted a set of Union retro-styled bow pedals to mine.
Hi Whizzer Pedals are 1/2 inch, almost all one-piece cranks are 1/2. I have used these cranks on other projects, and have sold quite a few 1/2 inch is the size.
The wrench is 15mm, is that where you are getting your 9/16?.
Hi Whizzer Pedals are 1/2 inch, almost all one-piece cranks are 1/2. I have used these cranks on other projects, and have sold quite a few 1/2 inch is the size.
The wrench is 15mm, is that where you are getting your 9/16?.
Mike, thank you for correcting my mistake. With all the vintage bicycles I've restored, I should know that. You're right, 9/16" was the size of the wrench I was using (as I don't have metric crescent wrenches). Ren, my apologies for giving you some bum information. I hope you didn't run out and get 9/16" pedals!
I'll check those places out, thanks again for your help. When I get done with mods I'll post some pics. Can I do that here or should I do that in the picture gallery?