digital_life
Active Member
Did you look at the boot -- it's close to 1/2 inch from the frame hell even if was a 1/4 I would still get one on
The whole issue is the front motor mount. Loose that and there is lots of room. If it's the latest and greatest, doesn't mean you have to use it.Would you mind showing us where that "lots of room might be"???...lol...lol.
A pic of his bike I just retrieved from another thread of his shows only enough room for his spark plug wire to attach to the plug and then it is touching the bike frame.
Ps...This is just another example of what I told the OP in previous posts here...Information needs to be provided, (along with pics), or we are all just wasting our time shooting in the dark to help out with his problems.
That would also get the cab straight too, The angle it is right now is way offThe whole issue is the front motor mount. Loose that and there is lots of room. If it's the latest and greatest, doesn't mean you have to use it.
The whole issue is the front motor mount. Loose that and there is lots of room. If it's the latest and greatest, doesn't mean you have to use it.
That front mount is made to pivot up and down...He just needs to use that pivot power so as to bring it down in the rear and raise it in the front a little using the pivoting function to best effect to realign that motor which will also decrease that carburetor angle which I am sure will effect how that motor is running which I would bet is so rich, it floods out.That would also get the cab straight too, The angle it is right now is way off
Actually, the angle of the float bowl will keep the float too low creating a lean condition and make it hard to start.That front mount is made to pivot up and down...He just needs to use that pivot power so as to bring it down in the rear and raise it in the front a little using the pivoting function to best effect to realign that motor which will also decrease that carburetor angle which I am sure will effect how that motor is running which I would bet is so rich, it floods out.
Do you think that could be his original problem all along, as per his original post???Actually, the angle of the float bowl will keep the float too low creating a lean condition and make it hard to start.