Piston G clip

[CrispyLeaves98]

Is this installed right? How do you install a g clip can't find any videos on it me and my friend need to put together a yd100

 

[Karl Snarl]

You want the gap at the top or bottom. So the force makes it want to expand and stay in place.

That clip looks like it don't fit, or been compressed to much.

 

[Chainlube]

First picture, no. second picture I can't tell, kinda blurry. The "e" clip has to be seated squarely in the groove. It's a good idea to find some new e clips if those were used once already.

 

[CrispyLeaves98]

You want the gap at the top or bottom. So the force makes it want to expand and stay in place.

could you please take a video? i really cant seem to figure it out

 

[CrispyLeaves98]

First picture, no. second picture I can't tell, kinda blurry. The "e" clip has to be seated squarely in the groove. It's a good idea to find some new e clips if those were used once already.

brand new

 

[Karl Snarl]

could you please take a video? i really cant seem to figure it out

That clip looks bad. Like it was compressed to much. Do as chainlube said and get a new one.

 

[Karl Snarl]

brand new

I use 10-11mm internal circlip. Depending on the maker what size. They have different shapes sometimes. They are kind of a pain to get it, but hold tight.

 

[CrispyLeaves98]

You want the gap at the top or bottom. So the force makes it want to expand and stay in place.

That clip looks like it don't fit, or been compressed to much.

This is a new clip, how do I get it in it looks to big

 

[CrispyLeaves98]

please we need help

 

[noah9988]

Take needle nose pliers and grab onto the straight part. You need to kind of twist it and press it into the groove. It's tricky and it will probably take several tries. Once it's in there you should be able to rotate it around in the groove.