Predator 212 tq converter wont engage

This is called the driver, the one at the other end is called the driven. If it just spins and spins, it's either lost or broken the key or the belt is fubar.

id take apart the front engagment pully and see if you can push it by hand, you could use some wd40 and a rag to help it out some.
 
I figured it out....
The engine shaft was stripped out a bit, so there wasnt any clamping pressure. I tack welded a bolt to the shaft, and installed it as before, and i got it to spin in and out. Problem was that it was tack welded, so after a minute, the weld broke.
Tommorow, ill weld it proper and retap part of the shaft...
 
Back
Top