Motorized_bike01
New Member
- Local time
- 11:54 PM
- Joined
- Jun 9, 2018
- Messages
- 4
good morning guys, this is the first time i use this forum. i want to show you my home made flywheel because the orginal one it's broken. the problem is that there is no spark at all! i measured the voltage of the blue and the black wires (4/8 volts with no load while i'm pushing my bike). i want to know if this voltage it's enough to trigger the stock CDI.
i have already check the ohm resistance of the stator and the stock CDI and all it's ok. i want to know if the voltage it's enough. thanks for any answers
you can see the home made flywheel with the magnets and the "pin" for a correct timing.
i have already check the ohm resistance of the stator and the stock CDI and all it's ok. i want to know if the voltage it's enough. thanks for any answers
you can see the home made flywheel with the magnets and the "pin" for a correct timing.
