Robocam
New Member
- Local time
- 7:13 PM
- Joined
- Jul 24, 2018
- Messages
- 9
Having a problem getting fuel into my HS 142F with the gravity fed carb. Purchased the 94oz tank and had it mounted on the drive channel. Gas didn't flow unless gas was filled to the cap. Raised it higher by mounting the tank on a rear rack. Still the same problem. Have one fuel line attached to the carb and the other one is tied off. Fuel only flows when the gas cap is loose, even though it appears to be vented. I'm doing something wrong and any help would be greatly appreciated.