problem with cyclone 360w kit

trikome

New Member
Local time
8:38 PM
Joined
Aug 2, 2008
Messages
1
Hi everybody, and thanks for this cool forum,
I have a question please, I've just put a cyclone 360w kit on my bike, with a lifepo4 10ah battery.
I've often the motor who is cuting when I accelerate a bit or when I climb a hill, it stops, the batery leds on the throttle goes to the orange when it's stops and then it's starting again.
Do you think this is a security or an electronic or electric problem?
thanks in advance
Manu
 
Does the red LED light come on ? Does the motor start running again after you close the throttle ?

It sounds like your battery voltage is sagging under load. A 24v10ah Lithium should be just enough battery if you are gentle on the throttle. If you don't have one already I recommend you get hold of a Cycle Analyist so you know what is happening electrically.

Cyclone's will draw a lot more power than their rating while accellerating
 
Back
Top