Question

Regalgse00

Active Member
Local time
2:03 PM
Joined
Jul 9, 2020
Messages
289
So I have a pk80 kit. And but I made my own intake pipe and am using a 26mm mikuni carb. Non reed with a mz65 pipe and I while riding for a bit and go to pull the clutch in to start to come to a stop. The bike will stay revved up and as I come closer to a stop it’ll start to whine down a bit. Any suggestions?
 
Is your intake sealed good? 26mm is pretty big carb for that engine, I use 19mm on a 79cc and it runs great and I also have a 158cc with the same carb that runs good too, heck, it'll pick up the front wheel.
 
Back
Top