Quick question----what is the material and finish on a 2002 Whizzer tail light assembly?

Wrench

Well-Known Member
Joined
Nov 14, 2018
Messages
3,825
IDK if ya got the Chrome Cover for the tail light bracket?
Maybe Paul @ www.whizzercruzzerparts.com can get you one.
Contact Paul and ask

I put the extra light/reflector and the Whizzer Plate on the back
 

Attachments

  • DSCF8378.JPG
    DSCF8378.JPG
    157.8 KB · Views: 29
  • DSCF5653.JPG
    DSCF5653.JPG
    151.6 KB · Views: 17

Wrench

Well-Known Member
Joined
Nov 14, 2018
Messages
3,825
Is it like this one Wrench???

Yep, that's the cover, I think he will sell it separate if asked.
 

Wrench

Well-Known Member
Joined
Nov 14, 2018
Messages
3,825
I do have a good chrome cover for the tail light so I should be all set now.
I also noticed someone put silicone on the wire & fender, Probably because Whizzer didn't put a grommet there.
Maybe ya want to clean that up and use a rubber grommet , The rear fender and light bracket is famous for chafing the wire's and causing a short.
Mount the light bracket then put the grommet on. If ya gotta make the hole in the fender bigger to fit the grommet then do so
But it does look like the wires are pretty well insulated with silicone and hopefully a harness sleeve
 

Attachments

  • DSCF5656.JPG
    DSCF5656.JPG
    62.6 KB · Views: 21

Wrench

Well-Known Member
Joined
Nov 14, 2018
Messages
3,825
I do have a good chrome cover for the tail light so I should be all set now.
I know the spots between the bracket and cover where the turn signal wires are suppose to come out pinches the wires

I drilled a hole on each side of the tail light bracket to snake the turn signal wires thru, Notice I used a grommet there too
 

Attachments

  • DSCF5658.JPG
    DSCF5658.JPG
    147.8 KB · Views: 18
  • DSCF5663.JPG
    DSCF5663.JPG
    127.6 KB · Views: 19

Wrench

Well-Known Member
Joined
Nov 14, 2018
Messages
3,825
I do have a good chrome cover for the tail light so I should be all set now.
While I'm showing you where to put grommets, there should also be a grommet on the rear fender where the rear wire harness goes thru.
This is another spot that's famous for chafing the wires and causing a short.
(Taiwan) Whizzer forgot to use grommets
 

Attachments

  • DSCF5665.JPG
    DSCF5665.JPG
    145.8 KB · Views: 13
Top