Hello Did You Manage To Sort The Problem ?
I Have Had The Same Issue Tonight And Found A Solution
Problem solved for my issue with the cover of the clutch arm not fitting back on as the pin seemed to be to long.
Hello , i had this problem today after adjusting the clutch at the Flywheel. Remove clutch cable from the arm.The problem was that i needed to tighten the clutch flywheel really tight (the Butterfly nut, the nut which is held in place by the small screw) tighten this really tight. Now try put the pin in and re assemble the cover that has the clutch arm on that sits over the cog tighten all screws. Now refit the clutch cable to the arm . Then untighten the Butterfly and adjust to required amount.
I Have Had The Same Issue Tonight And Found A Solution
Problem solved for my issue with the cover of the clutch arm not fitting back on as the pin seemed to be to long.
Hello , i had this problem today after adjusting the clutch at the Flywheel. Remove clutch cable from the arm.The problem was that i needed to tighten the clutch flywheel really tight (the Butterfly nut, the nut which is held in place by the small screw) tighten this really tight. Now try put the pin in and re assemble the cover that has the clutch arm on that sits over the cog tighten all screws. Now refit the clutch cable to the arm . Then untighten the Butterfly and adjust to required amount.