Recommendation On A Double Leg Kickstand

  • Thread starter Deleted Member 4613
  • Start date
Yea well ... to me they are a b*tch!
Mine is easy to set and, to roll off of even fully loaded. I don't have to jerk on anything. I put a foot on the stand, grab the frame near the seat post and lift. Press down on the stand the legs spread, come into contact with the ground and the bike pivots back and the stand is holding the rear wheel off the ground about half an inch. The bike also has a handlebar lock so the bars stay straight even with full panniers. To get it off the stand just lift the frame a little and roll the bike forward a few inches and the legs retract into place.
 
I was unhappy with my center kick , the bike was wobbly cause the holes around the rivets where too big from the get go , took it apart and drilled the rivets out and the holes to the next side bigger and installed some bolts , much tighter now
 

Attachments

  • fullsizeoutput_ee0.jpeg
    fullsizeoutput_ee0.jpeg
    262.8 KB · Views: 100
  • WBLZb0aSRJi6U3lbK76D8Q.jpg
    WBLZb0aSRJi6U3lbK76D8Q.jpg
    216.1 KB · Views: 108
  • V464XncVQ9+aAOYt3Inpnw.jpg
    V464XncVQ9+aAOYt3Inpnw.jpg
    465 KB · Views: 106
Back
Top