Recommendations for avenger 85 wrist pin bearing

Sasquatch889

New Member
Local time
2:21 AM
Joined
May 17, 2024
Messages
3
Location
United States
Hey, so I want to replace my avenger 85s wrist pin bearing. I bought this one here - https://www.ebay.com/itm/305303825645
It fits great except it has too much top and down play with the crank. Just any recommendations that is known to work please. Thanks!
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
Hey, so I want to replace my avenger 85s wrist pin bearing. I bought this one here - https://www.ebay.com/itm/305303825645
It fits great except it has too much top and down play with the crank. Just any recommendations that is known to work please. Thanks!
Should be the same bearing as the Phantom 85, which is a Stihl 046 (MS460) 12 x 16 x 15 bearing.
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
Hey, so I want to replace my avenger 85s wrist pin bearing. I bought this one here - https://www.ebay.com/itm/305303825645
It fits great except it has too much top and down play with the crank. Just any recommendations that is known to work please. Thanks!
Should be the same bearing as the Phantom 85, which is a Stihl 046 (MS460) 12 x 16 x 15 bearing.
I notice that the measurement on the Ebay bearing says 12 x 15 x 15,

Whilst the needle bearing that Rocket is showing, which is the same for the Phanom 85 motor, measures 12 x 16 x 15.

Is that a correct measurement @ImpulseRocket ???
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
I notice that the measurement on the Ebay bearing says 12 x 15 x 15,

Whilst the needle bearing that Rocket is showing, which is the same for the Phanom 85 motor, measures 12 x 16 x 15.

Is that a correct measurement @ImpulseRocket ???
Yep. 1mm smaller O.D. and it has lots of up and down play. Makes sense to me.
 
I notice that the measurement on the Ebay bearing says 12 x 15 x 15,

Whilst the needle bearing that Rocket is showing, which is the same for the Phanom 85 motor, measures 12 x 16 x 15.

Is that a correct measurement @ImpulseRocket ???
Yeah, that is what I found. 1mm smaller, I ended up buying an ms460 wrist pin bearing
 
Back
Top