Replacing Sealed bearings on Worksman Cycles Wheel

Wrench

Well-Known Member
Local time
5:20 AM
Joined
Nov 14, 2018
Messages
8,992
Location
So Cal
I noticed my rear wheel squeaking and upon inspection it's the sealed bearings
It's been 17 years and I put over 40K miles on that wheel so I'm not surprised the bearings needed replacing
I took the rubber seals off the old bearings and just as I suspected there was no more grease in the bearings
DSCF9761.JPG
Basically to replace the bearings ya just punch em out and press in some new ones

I should probably also replace the front wheel sealed bearings they have over 40k miles on em too
Next time I change the front tire I'll replace the front wheel sealed bearings but for now their quiet and smooth,

Pics of replacing the sealed bearings
 

Attachments

  • DSCF9748.JPG
    DSCF9748.JPG
    165.2 KB · Views: 85
  • DSCF9749.JPG
    DSCF9749.JPG
    164.3 KB · Views: 64
  • DSCF9750.JPG
    DSCF9750.JPG
    146.5 KB · Views: 69
  • DSCF9752.JPG
    DSCF9752.JPG
    184.5 KB · Views: 67
  • DSCF9753.JPG
    DSCF9753.JPG
    134.2 KB · Views: 68
  • DSCF9754.JPG
    DSCF9754.JPG
    137.8 KB · Views: 63
  • DSCF9755.JPG
    DSCF9755.JPG
    155.3 KB · Views: 85
  • DSCF9756.JPG
    DSCF9756.JPG
    133.8 KB · Views: 65
  • DSCF9757.JPG
    DSCF9757.JPG
    135.8 KB · Views: 68
  • DSCF9758.JPG
    DSCF9758.JPG
    148.9 KB · Views: 83
  • DSCF9759.JPG
    DSCF9759.JPG
    166.3 KB · Views: 71
  • DSCF9775.JPG
    DSCF9775.JPG
    213.7 KB · Views: 93
Back
Top