Schwinn All Belt Q-Matic

Discussion in 'Photos & Bicycle Builds' started by RusticoRay, Apr 26, 2010.

  1. RusticoRay

    RusticoRay Member

  2. azbill

    azbill Active Member

    lookin good Ray !!! :)
  3. vegaspaddy

    vegaspaddy Member

    hi ray, SOLID.... that should keep you on the road for a long time to come..

    I like the postion of the headlamp out the front, how did you attach it, to the handlebars themselves or to the stem, i would love to see a close up shot, i am pulling my hair out trying to come with a clean mount for my light and signal setup up front.
  4. KilroyCD

    KilroyCD Active Member

    That is one good looking bike Ray! :grin5:
  5. RusticoRay

    RusticoRay Member

    The light is for looks only, its not hooked up to a battery. It's from advanced auto parts 12volt tractor light. It came with mounting hardware and I attached it to the stem. I'll take a pic later today for you.
  6. vegaspaddy

    vegaspaddy Member

    no matter, working or not still looks the bomb on there...

    once i get my wifes trike sorted out i will start attacking my bike at full force still under wraps and parts scattered all over the place.
  7. Irish John

    Irish John Guest

    How does it perform and are there problems with the belt touching the tyre?
  8. RusticoRay

    RusticoRay Member

    It performs very well, its not fast of the line but a very stable setup. With the HS 50cc it tops out at 32-34 mph. A little more if I lean down and get out of the way. It is tight, no problem it's not touching the tyre but I did have to tweek the upper and lower stays on both sides. 3 3/4" to start and 4 1/4" when done.
    Last edited: May 3, 2010