Schwinn chopper trike !!!

[azbill]

my son-in-law and I just got off the phone with Roland from Spooky Tooth and we are gonna make the first (that we know of) motorized chopper trike will give details as we go
gonna try to use a jackshaft from a grubee stage 1 4cyl kit it's gonna be a challenge...everyone says "you can't do that" but we are gonna try

Bill

PS I have a Nirve Deviate http://www.nirve.com/cruisers.asp?cat=chopper&cid=582 coming gonna put a motor in it too

 

[bamabikeguy]

I have a customer in Birmingham who is having me install a 35cc GEBE on a trike, my first front wheel installation. I'm pretty sure this is the one he chose (with some adaptation on the front wheel size):



There are about 30 different tricycles shown on their website, including ice cream vending types.

http://industrialbicycles.com/tricycles.htm

I'll also take before/after pix when its finished.........

 

[gone_fishin]

azkronik, you mean you're gonna put a frame-mount engine on a trike?

lots of pics, purty please 8)

 

[Blaze]

Nirve Deviate Chopper

The Nirve choppers make great motorized bikes, it's just a feat of engineering to get them together. Let me know how you do it. I built a Switchblade chopper and it looks pretty good.

http://houseofblaze.com/bicycle.html

Some of the things I did with my bike might work with yours, but the frame is very different, so I'm looking forward to seeing how you get everything together. Just don't try to make a copper exhaust like I did. It looked like an easy way to do it. The final exhaust I built was made from brass showerhead extensions from Ace Hardware, sawed into sections and welded back together.