Schwinn Skyliner With 4 Stroke

Discussion in 'Photos & Bicycle Builds' started by birddog, Nov 8, 2007.

Tags: Add Tags
  1. birddog

    birddog Guest

    Last edited by a moderator: Nov 9, 2007

  2. mickey

    mickey Guest

    So, where did he get the 3 piece crank?
  3. Alaskavan

    Alaskavan Guest

    I'd say the four-strokes are coming of age.
  4. birddog

    birddog Guest

    He got his cranks from a guy in AZ who only had one available.
  5. Hollywood

    Hollywood Guest

    Josh,how much gear oil do you put in the gear case and were do you put it into the gear case?
  6. birddog

    birddog Guest

    We have found that a mixture of heavy gear oil and stop leak works best. Use about half and half. It only takes about 3-4 ounces. You can pour it right down the hole on the top of the gear box where the engager lever extends. See the picture below. The stop leak bottle shows where to add.

    You may notice some leakage from the gear box as the gasket wasn't designed for wet use. To eliminate that you can use a waterproof form-a-gasket or even some silicone.

    The clutch will slip a little at first, but after a short time it will burn off any excess and should be smooth and chatter free. You can add more when the clutch starts to chatter again.

    Attached Files: