Yahoo know what I noticed tonight? It was a bit cooler out. And my MB road much MUCH BETTER I think I news to change plugs when it gets hot.
Like we say " IF YOU DON'T LIKE THE WEATHER IN CHICAGO WAIT A MINUITE IT WILL CHANGE!
Just thinkin out loud. Could a crank seal with less pressure at lower rpm act like a vacuum leak causing high idle, then at increased rpm with added case pressure have a reverse effect and rob the case of pressure hindering fuel transfer hence poor top end performance? I've used the soapy water test when replacing gas appliances to check for gas leaks in the plumbing joints many times, but never dawned on me to use it for crank seal test. It amazes me how I can overlook such simple logical solutions for a task. Thanks again Jag.
So if your air\fuel is set just right on a engine with a reed valve and a well timed expansion chamber a crank seal leak could be real bad on a engine real quick. The two stroke is a interesting beast.
So if your air\fuel is set just right on a engine with a reed valve and a well timed expansion chamber a crank seal leak could be real bad on a engine real quick. The two stroke is a interesting beast.