So bike wont start.

A

Atom

Guest
After running through the trouble shooting check list , I relized I can see light through the corners on the top seal of the motor head. Is that the problem?
 
After running through the trouble shooting check list , I relized I can see light through the corners on the top seal of the motor head. Is that the problem?
No.
There is a round raised sealing ring on the head so that is what you are seeing.
The aluminum head gasket will always have a gap the same thickness as the raised area.

Did you check for spark?
 
spark, compression, fuel . chk plug for spark, timing too... fuel in cylinder? old gas? throttle slide opening? clogged air filter flooding?
 
Back
Top