So whats the best motor for speed

Have you retorqued the head bolts/nuts in an X torque pattern after every heat cycle once it is totally cold again to 144 inch pounds???
No i haven't tried that yet.
So what should I do?????
I'm pretty sure I already answered that question, I already told you about torqueing that jug down to 144 inch pounds with a torque wrench...Since you have said you haven't done this, that is the very FIRST place to start.
 
Mine always starts between 6 and 7 MPH, I see that on my speedo before releasing the clutch and my Phantoms always start first time everytime for me...Just dont forget to pull the choke lever all the way up first...lol...lol.
 
And the rear sprocket will effect how it starts. After I changed from a 44t to a 32t, I had to be going faster but it had more leverage and was a lot easier to start.
 
Mine always starts between 6 and 7 MPH, I see that on my speedo before releasing the clutch and my Phantoms always start first time everytime for me...Just dont forget to pull the choke lever all the way up first...lol...lol.
And the rear sprocket will effect how it starts. After I changed from a 44t to a 32t, I had to be going faster but it had more leverage and was a lot easier to start.
My 6 to 7 MPH is with a 36 tooth rear drive sprocket.
 
Back
Top