Sprocket Adapter for Schwinn Meridian

[wolvmarine]

I have a GX50 on my trike It would run 40 If I changed the sprocket on it. That's just to fast for me . It fits under the basket. Quitter than the predator, 4 stroke, half the weight

First time looking at the GX50 sounds like its a nice rig and not too expensive either. If you can get 40mph out of that, that's great !!! 40 is plenty for me and a tiny weed-eater sized rig would be very easy to tuck away. Do you have pics of your system? Certainly much lighter than the Pred' 212, 45ish lbs! Could I ask what trike your using and your weight. Cuz some skinny folk post on here and I'm twice as big as them and I would never get the same stats that they do.

UPDATE: nvm I found pics of your trike::

20201027_155358.jpg

Pav3 with staton gearbox an GX50

motoredbikes.com

I can't tell what make and model tho? Also, how fast are you able to get on this and your weight?

 

[wolvmarine]

I have a GX50 on my trike It would run 40 If I changed the sprocket on it. That's just to fast for me . It fits under the basket. Quitter than the predator, 4 stroke, half the weight

Nice example of this motors capabilities.

 

[ehsiii]

Ok

ok so it lies between the chassis and the wheel hub. Got it, if my next setup fails ill certainly give it a try as well. Do you know what the return policy is for these? I'd be more worried that it would freewheel in the standard/CCW fashion rather than CW. Also same with threading CCW or CW as well.

 

[ehsiii]

Im sure you can return this if there was a problem. So these are pics of meridians . different set up than you have . one of them the arrow is pointing at the adapter. you will probably have to reposition your motor shift it over in the center of the basket. but this is a much more reliable way to do this

 

[ehsiii]

Nice example of this motors capabilities.

Ya I saw I set up like that in coco beach this past spring. Great motor a little pricey

 

[ehsiii]

First time looking at the GX50 sounds like its a nice rig and not too expensive either. If you can get 40mph out of that, that's great !!! 40 is plenty for me and a tiny weed-eater sized rig would be very easy to tuck away. Do you have pics of your system? Certainly much lighter than the Pred' 212, 45ish lbs! Could I ask what trike your using and your weight. Cuz some skinny folk post on here and I'm twice as big as them and I would never get the same stats that they do.

UPDATE: nvm I found pics of your trike::

20201027_155358.jpg

Pav3 with staton gearbox an GX50

motoredbikes.com

I can't tell what make and model tho? Also, how fast are you able to get on this and your weight?

 

[ehsiii]

I have it on a pav3 with a staton gearbox. Im 230lb trike is heavy to , I have a 1000 watt wheel on the front also. with just the gas motor 20 or 25 mph its geared low . we have big hills .. but that's fast enough for me.

 

[ehsiii]

Ok

ok so it lies between the chassis and the wheel hub. Got it, if my next setup fails ill certainly give it a try as well. Do you know what the return policy is for these? I'd be more worried that it would freewheel in the standard/CCW fashion rather than CW. Also same with threading CCW or CW as well.

The ccw threading is what you want . It will work great

 

[ehsiii]

Ok

ok so it lies between the chassis and the wheel hub. Got it, if my next setup fails ill certainly give it a try as well. Do you know what the return policy is for these? I'd be more worried that it would freewheel in the standard/CCW fashion rather than CW. Also same with threading CCW or CW as well.

and the axle on the meridian is 17mm

 

[wolvmarine]

I have it on a pav3 with a staton gearbox. Im 230lb trike is heavy to , I have a 1000 watt wheel on the front also. with just the gas motor 20 or 25 mph its geared low . we have big hills .. but that's fast enough for me.

wow that thing is overbuilt !