(You just pay for shipping.)
...
I have a pair of stainless steel pressure tanks - apx. 1/2 gallon capacity. They're 5-1/2 inch diameter, and 7-1/2 inch long (not counting the fittings.) A little less than 4 pounds weight, dry. The shipping weight will be around 6 pounds. (Ground shipping cost should be less than $10)
They have a 1 inch, 90 degree ell flange fitting, a 1/4 or 1/8 NPT female fitting, and a 1 inch compression flange fitting, all welded to one end of the tank. Snapshots are below.
I figure they would make a nice fuel tank - they LOOK sort of like a small beer keg...
They will need to be cleaned out before use. (there's remnants of burned pyrotechnic propellant inside them.) Probably a half a cup of sand, a bit of dishwashing detergent, and a quart of water inside, block the exits, and shaking vigorously for a while should do the trick. Plus, there's a bit of white paint/overspray on the outside.
Please send me a PM if interested - I can get a shipping quote & let you know. Then, you Paypal payment to reimburse me for the shipping costs, and I ship one of them out to you.
...
I have a pair of stainless steel pressure tanks - apx. 1/2 gallon capacity. They're 5-1/2 inch diameter, and 7-1/2 inch long (not counting the fittings.) A little less than 4 pounds weight, dry. The shipping weight will be around 6 pounds. (Ground shipping cost should be less than $10)
They have a 1 inch, 90 degree ell flange fitting, a 1/4 or 1/8 NPT female fitting, and a 1 inch compression flange fitting, all welded to one end of the tank. Snapshots are below.
I figure they would make a nice fuel tank - they LOOK sort of like a small beer keg...
They will need to be cleaned out before use. (there's remnants of burned pyrotechnic propellant inside them.) Probably a half a cup of sand, a bit of dishwashing detergent, and a quart of water inside, block the exits, and shaking vigorously for a while should do the trick. Plus, there's a bit of white paint/overspray on the outside.
Please send me a PM if interested - I can get a shipping quote & let you know. Then, you Paypal payment to reimburse me for the shipping costs, and I ship one of them out to you.
Attachments
Last edited: