S
skyl4rk
Guest
Please post your start up procedure and the kind of engine you are running.
I have a 80cc chinese model.
Start up procedure:
turn the fuel valve to on
push the tickler
count to 6 or 8, let up on the tickler before it weeps gas
pull the clutch lever in
pedal four strokes
release clutch
open throttle half way, more or less
keep pedaling till it starts
close choke while under way
let it run and warm up a bit at low throttle
then give it full throttle.
I have a 80cc chinese model.
Start up procedure:
turn the fuel valve to on
push the tickler
count to 6 or 8, let up on the tickler before it weeps gas
pull the clutch lever in
pedal four strokes
release clutch
open throttle half way, more or less
keep pedaling till it starts
close choke while under way
let it run and warm up a bit at low throttle
then give it full throttle.