Taylar Excelsior Tribute motorbike

MotoMagz

Active Member
Joined
Dec 19, 2008
Messages
449
Builds this with Dan from Taylar Cycles. What sets them apart from the others ...is their one of customs. If your going to build a bike go we’re you can design your own! Not pick a premise bike of a web page.. boring. This experience was was awsome . I found pictures of what I wanted and Dan did his magic! https://www.facebook.com/groups/450770135128003/
4DCA9D2F-B231-40B3-81B4-3DB9179D65DE.jpeg
FC090678-C1DB-429E-8DE0-BC03B67A3B0C.jpeg
11FD2E47-F912-4063-9D64-BDC9B81A716F.jpeg
FC090678-C1DB-429E-8DE0-BC03B67A3B0C.jpeg
5EC6BD25-E6D9-459F-A8EC-312CA993BFDD.jpeg
A8EFA68D-C099-44D8-AA6B-19D774DCEC11.jpeg
p
 
Last edited:


zean

Member
Joined
Dec 5, 2010
Messages
75
That bike is beautiful. The color, the fork, the frame, the engine, the belt drive, the handle bars and levers. What type is that rear hub and spokes and rim that are strong enough to hold up to the force on the drive ring? That old traditional style looks as close to perfect as anything on earth.
 

MotoMagz

Active Member
Joined
Dec 19, 2008
Messages
449
Thank! The rear wheel is a alloy Worksman -wheel,11g spoke and drum hub. It was belt to belt drive but it was slipping . So Im in the process of going chain to belt. The wheels should handle it if not I’ve been looking into moped wheels 19” or 21” . Pic. Shows old reduction setup
545A0871-B069-4E49-88CC-DA7E5E28E23A.jpeg
 

Wrench

Well-Known Member
Joined
Nov 14, 2018
Messages
674
Beautiful - A Droploop frame Crusier is gonna be my next Motorbike.
What dose a custom build like that cost about $3k +
Pat at www.Sportsmanflyer.com makes some cool Droploop frame Motorbikes
 

MotoMagz

Active Member
Joined
Dec 19, 2008
Messages
449
Yep ,Id say the complete build with built motor about $3. I like Pats stuff I just wanted my own style so went this route. The sitting position is so comfortable is a blast.
 
Top