throttle is stuck can't seem to get it unstuck

[Rick73]

when I start the bike the throttle is stuck on full throttle I hold in the clutch and it's reving like I'm full throttle I have been trying to adjust but it don't seem to help. Any recommendations

 

[crassius]

loosen carb and pull it off enough to see inside the mount - turn throttle and see if slide goes up and down

 

[Rick73]

loosen carb and pull it off enough to see inside the mount - turn throttle and see if slide goes up and down

it was the needle, it wasn't in right. after putting it in right throttle is working great.

 

[inspectorcritic]

when I start the bike the throttle is stuck on full throttle I hold in the clutch and it's reving like I'm full throttle I have been trying to adjust but it don't seem to help. Any recommendations

when I start the bike the throttle is stuck on full throttle I hold in the clutch and it's reving like I'm full throttle I have been trying to adjust but it don't seem to help. Any recommendations

f*** sounds dangerous you most likely need to replace throttle cable and housing or first dissasemble your throttle it maybe forming a loop then jams it on return.

Check your cable could be frayed feel your cable does it slide easy you might have a plastic snag on throttle you can use a box cutter little it to fit.

My performance carb springs 4 times longer than TN carb spring. Just expect to replace the whole unit don't buy from California bike bought one inside thin strip of plastic broke with 2 weeks if you can find one that's made out of metal buy they last for ever plastic expect to replace it once a year.

 

[inspectorcritic]

when I start the bike the throttle is stuck on full throttle I hold in the clutch and it's reving like I'm full throttle I have been trying to adjust but it don't seem to help. Any recommendations

Also check your assembly does it fit nice and snug? If it's crooked it can jam.
Also makes the throttle real slick and smooth like hot woman's c**t take throttle off put a few drops of 3 in One oil on the metal handle bar.

 

[FurryOnTheInside]

Also check your assembly does it fit nice and snug? If it's crooked it can jam.
Also makes the throttle real slick and smooth like hot woman's c**t take throttle off put a few drops of 3 in One oil on the metal handle bar.

He fixed it already!?! Read the post above yours.

 

[inspectorcritic]

He fixed it already!?! Read the post above yours.

Others may benefit f***ing retard question to begin with.

 

[Rick73]

Others may benefit f***ing retard question to begin with.

sorry you think it's a retarded question but I'm new at this and I had no clue and figured a forum for motorized bikes would be the place to ask. what I didn't realize is that I'd get a retarded comment.

 

[CrazyDan]

sorry you think it's a retarded question but I'm new at this and I had no clue and figured a forum for motorized bikes would be the place to ask. what I didn't realize is that I'd get a retarded comment.

Ignore the inspector, he's our forum's token schizophrenic...believes he's been to mars, reptilian humanoids, flat earth, the matrix and anything else schizo's believe...most of us help and play nice with others .

 

[Rick73]

Ignore the inspector, he's our forum's token schizophrenic...believes he's been to mars, reptilian humanoids, flat earth, the matrix and anything else schizo's believe...most of us help and play nice with others .

I got ya. And ya lots of great help on here thus forum has help me out alot. ( fyi. the earth is flat research it ODDTV on YouTube check him out. Can't go to mars and not to sure about the lizard people lol but flat earth 100%)