Titan XC Engine with Staton 18.75:1 Gearbox

Discussion in '4-Stroke Engines' started by newzeey, Jul 19, 2008.

  1. newzeey

    newzeey New Member

    Does anyone know if the Staton 18.75:1 gearbox will fit the Titan XC engine sold by Thats Dax?

  2. ocscully

    ocscully Member

    I don't know from actual first hand experience but I believe it will. The mount around the clutch of the Titan is the same as the mount of the various smaller cc 2-strokes that come with the larger clutch and the Subaru/Robin 35cc 4-Stroke. If you look closely at the photos of the Titan without the PTO/reduction gearbox attached you will also notice that the engine case partially shrouds the clutch just like the the mounts of the motors already mentioned.

  3. SirJakesus

    SirJakesus Guest

    I know the staton gearbox needs a special adapter to fit the honda 50 engine. I have no idea about the titan but I would assume it's different spacing than the mits43 or robin35. Get the exact spacing and threading from dax if possible and ask staton yourself. It's the only way to know for sure.
  4. ocscully

    ocscully Member

    Yes the Honda does require the Staton adapter but the Titan mount location is different. The adapter is essentially built in. The Dax PTO is essentially the same type of reduction gearbox that fits the various pocket bike motors and bolts directly to the Titan no spacer/adapter required. If you wanted to mount the Dax PTO to a honda, you could buy the Staton adapter and then the dax unit would bolt up. Below is a photo of the backview of the Titan compare it to the view of the Mitsubishi at the staton site here http://www.staton-inc.com/Details.asp?ProductID=3184 or to the Subaru/Robin here http://www.staton-inc.com/Details.asp?ProductID=3264


    Attached Files: