zuide2000@gmail.com
New Member
Hey every one i just finished my first build and am having a hard time getting it dialed in. Ive read alot of others advice and ideas and things they've done. I have the CNS V3 carb and have several different size jets i've been playing with. I hooked the two vent hoses together and punched a really small hole in the one hose. I lowered the float for less gas and put a 66 jet in. I got in to the factory sealed air/fuel mixture screw and it was all the way closed so i opened it one full turn and am trying different settings. No matter what i do it either is too lean or too rich. I have almost no power at the low end and it gradually slowly will get up to speed. once there it runs great. Even when its hot and i turn it off for a minute to go in to 7 - 11 it still bogs on take off and i have to use the choke to get it up to cruising speed. I'm running out of ideas has any one had similar problems and figured it out??
Last edited by a moderator: