will_start
Member
Hey Kerf,
Whats inexpensive to you living on a $50-100K income may be expensive
to a kid on a $500 a year income. Believe me I know, been there done that...
So my idea is centred around helping those with standard tools and no funds
to buy more. I have easily spent the cost of the motor on tools and spares
and ...
To answer your question for the chinese motor 12 ft/lb is the torque given by the online manual I used.
See below link.
http://www.zbox.com.au/instructions.htm
6. Head Bolts
Tighten all fasteners after each five hours of operation. It's most important to check cylinder head bolts: tighten in a X pattern to 12 ft/lb. using a torque wrench. A two piece cylinder and head design engine requires head bolts be kept tight. Important: Check head bolts before each and every ride, vibration can cause them to loosen and blow a head gasket. Caution: Do not over torque or head bolts may break off.
WS.
Whats inexpensive to you living on a $50-100K income may be expensive
to a kid on a $500 a year income. Believe me I know, been there done that...
So my idea is centred around helping those with standard tools and no funds
to buy more. I have easily spent the cost of the motor on tools and spares
and ...
To answer your question for the chinese motor 12 ft/lb is the torque given by the online manual I used.
See below link.
http://www.zbox.com.au/instructions.htm
6. Head Bolts
Tighten all fasteners after each five hours of operation. It's most important to check cylinder head bolts: tighten in a X pattern to 12 ft/lb. using a torque wrench. A two piece cylinder and head design engine requires head bolts be kept tight. Important: Check head bolts before each and every ride, vibration can cause them to loosen and blow a head gasket. Caution: Do not over torque or head bolts may break off.
WS.