DieselTech
Well-Known Member
- Local time
- 12:10 AM
- Joined
- Sep 18, 2021
- Messages
- 7,043
Ok guys I finally got off my butt, & started to build a 79cc iron sleeve engine. My friend gave me his new engine that broke the magneto end of the crankshaft off. I had a really old 66cc with a bad case & good crankshaft, so I took the good case & the good crank & started to build. The crank has been balanced for my 49mm bore. I got the lower end built other than putting magneto magnet back on. Heres a few pics.I would like some of you pro builders to chime in when I get to the point of installing degree wheel & checking port timing. I'm wanting a low to mid range rpm grunt monster!!!