Two-stroke 80cc motor pull starter issue

MSowards87

Member
Local time
6:22 AM
Joined
Jun 29, 2020
Messages
70
Location
Houlton, ME
I just got a new bike and new motor kit together through bikeberry.com I have installed and assembled the bike and motor together and had it working then ordered and installed a pull starter now the motor will not start using the pull starter and of course makes the motor too big to pedal start not being able to turn the pedals around because of the pull starter sticking out of the side of the motor now could anybody possibly help with why this might be have tried starting it with different stages of the choke opened and closed
 
If ya want to keep the pull start, you'll have to get an extended (wide) crank
 
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.
Don't want to pedal? Just run and jump on and let the clutch out all at the same time. Putt, putt.
 
Don't want to pedal? Just run and jump on and let the clutch out all at the same time. Putt, putt.
Haha I know now I can I took the pull starter off it works fine now I have had four months of horrible luck with an old bike with a new motor I bought and then went and bought a new bike and another new motor is why I didn't want to keep pedaling it every time I would get one thing fixed something else would f**** up so I was doing a lot of pedaling trying to start it but now it works fine LOL
 
Back
Top