Two wire kill switch

Discussion in 'Electrical' started by Dr. Doom, Nov 23, 2009.

  1. Dr. Doom

    Dr. Doom Member

    I have a two wire kill switch, What's up with that? IMG_0053[1].jpg I'm confused with which wires to connect them to. IMG_0056[1].jpg

    This switch is from a F60 62cc kit
    Last edited by a moderator: Dec 15, 2015

  2. Dilly Bar Rob

    Dilly Bar Rob Member

    Black from kill switch to black on engine/cdi unit. Yellow from kill switch to blue* wire on engine/cdi unit. I recommend to solder & heatshrink the connections. If you can't solder them at least use some heatshrink.

    *- some members may recommend that you to connect the yellow wire to the white (lighting) wire on the engine, for it may be easier on the magneto. No matter which wire you use (white or blue) it will work.
    Last edited: Nov 23, 2009
  3. Dr. Doom

    Dr. Doom Member

    Thanks Rob
  4. happycheapskate

    happycheapskate Active Member