Upgraded throttle?

Attachments

  • Screenshot_20220201-084024.png
    Screenshot_20220201-084024.png
    178.4 KB · Views: 116
What about a kill switch though? Those aftermarket throttle cable doesn't come with kill switch on the housing.
 
What about a kill switch though? Those aftermarket throttle cable doesn't come with kill switch on the housing.
I found it in Green !!! Just make sure it fits your bar diameter... The on off swiches worked backwards for me...
 

Attachments

  • Screenshot_20220201-134456.png
    Screenshot_20220201-134456.png
    275.7 KB · Views: 110
  • Screenshot_20220201-134825.png
    Screenshot_20220201-134825.png
    289.1 KB · Views: 109
I found it in Green !!! Just make sure it fits your bar diameter... The on off swiches worked backwards for me...
This is what I ordered.... two items... coming today. Did not know about switch fitting on brake lever? But I ordered in basic Black..... because my bike is black... :cool: $30 from amazon. two-day shipping.
 
This is what I ordered.... two items... coming today. Did not know about switch fitting on brake lever? But I ordered in basic Black..... because my bike is black... :cool: $30 from amazon. two-day shipping.
what is the set screw for? I see that with it protruding any amount it is stop for the twist halfway around, but what would you need to adjust it's length or penetration for? Does it have to do with the diameter of the bars so if the clamp is not closed as much you have to lengthen the screw depth?
 

Attachments

  • IMG_1970.JPG
    IMG_1970.JPG
    201.2 KB · Views: 92
  • IMG_1971.JPG
    IMG_1971.JPG
    225.4 KB · Views: 78
what is the set screw for? I see that with it protruding any amount it is stop for the twist halfway around, but what would you need to adjust it's length or penetration for? Does it have to do with the diameter of the bars so if the clamp is not closed as much you have to lengthen the screw depth?
The set screw keeps the throttle from moving past closed throttle and working backwards... The many holes are for different lengths cable because a larger carb opens more than a small one... Try it before you tighten it up
 
Back
Top