What i need to do to new engine kit.

Stock

New Member
Local time
7:15 PM
Joined
Aug 3, 2020
Messages
3
Hi everyone,
I am planing to buy a new engine kit so what oil mixture I need to use and should I open the engine to check or something? (ChinaDoll)
ENGINE KIT LINK
 
Hi everyone,
I am planing to buy a new engine kit so what oil mixture I need to use and should I open the engine to check or something? (ChinaDoll)
ENGINE KIT LINK
With new engine be sure to pull cylinder flush engine out do it twice with flush. Use new head gasket before putting head back to my on. Run only 20/1 Lucas 2tanks 24/1 after never look back. Try using clip on carb set it on 2: from top plug gap at 24. This is always a very good starting point. For everyone. But I live in Texas. But I know this oil mix is best you will have clean burn less wear on clylinder. Always make good seals on all gaskets any one tell you to use anything less then 24/1 is a dum a fool.
 
Thanks for the tip. I did that when I got my new engine. I did find what looked like very fine dust in the crank case.
 
Back
Top