applicant_255
New Member
A few weeks back I had a very successful yard sale on my way to work.
I managed to break all the things that attach to the carburetor into several pieces each.
Most of it I've successfully glued back together with some stuff I picked up Canadian Tire - "Gas and Oil Resistant Seal All".
It worked pretty well, so I went for a spin around town, but about twenty minutes in the engine started running a bit lean. When I checked, the insulator, a plastic piece that holds the carb, and everything attached to it, to the head, had come apart at one crack, So I pedaled home.
Everything else held up really well, but the seal all just couldn't hold the insulator together.
I had some Cyanoacrylite Model Airplane glue, so I stuck that on and let it harden, but it lasted about the same length of time, about twenty minutes before the part cracked open again, and I decided to pedal home.
I started looking for a replacement part online, and was surprised to find it wasn't fantastically expensive, 10-20 bucks, but I can't find a place that will ship to Canada for some reason.
Staton says to email them at sales looking for a quote to Canada, as their web store can't handle the S&H charges up this way. I emailed them on the 8th with what I'm looking for, and my address, and haven't heard back from them.
Here's the part I'm looking for
Part 592-30050-01 ( though one website said it was replaced with 592-30050-02 )
http://www.staton-inc.com/Details.asp?ProductID=3092
Does anybody have any ideas for super-strong glue that will hold this part together, or a place that will ship it to me in Canada?
I managed to break all the things that attach to the carburetor into several pieces each.
Most of it I've successfully glued back together with some stuff I picked up Canadian Tire - "Gas and Oil Resistant Seal All".
It worked pretty well, so I went for a spin around town, but about twenty minutes in the engine started running a bit lean. When I checked, the insulator, a plastic piece that holds the carb, and everything attached to it, to the head, had come apart at one crack, So I pedaled home.
Everything else held up really well, but the seal all just couldn't hold the insulator together.
I had some Cyanoacrylite Model Airplane glue, so I stuck that on and let it harden, but it lasted about the same length of time, about twenty minutes before the part cracked open again, and I decided to pedal home.
I started looking for a replacement part online, and was surprised to find it wasn't fantastically expensive, 10-20 bucks, but I can't find a place that will ship to Canada for some reason.
Staton says to email them at sales looking for a quote to Canada, as their web store can't handle the S&H charges up this way. I emailed them on the 8th with what I'm looking for, and my address, and haven't heard back from them.
Here's the part I'm looking for
Part 592-30050-01 ( though one website said it was replaced with 592-30050-02 )
http://www.staton-inc.com/Details.asp?ProductID=3092
Does anybody have any ideas for super-strong glue that will hold this part together, or a place that will ship it to me in Canada?