Whizzer alternator wiring

[DaleIce]

I've got a '99 Whizzer that the P.O. cut and removed the wiring. He had wired in a TZR50 CDI but
that was it and its just hanging there. There are 5 wires from the alternator and no connection plug.
I've looked at the wiring diagram and only see the white, black/red and the yellow listed. Where do the
green and blue wires go? Any drawing of hot wiring it? I'd like to, at least, try the motor before I commit to
a new wiring harness. There are no lights of any kind on it anyway. I've ordered a new battery. It does have a spark coil.
No ignition switch or a/c-d/c relay, etc
thanks, Dale

 

[Wrench]

blue/white is the Trigger P/U

Green from the stator is ground but the Stator is already grounded because it's bolted to the engine so ya don't need it

Alls ya need is the red/black and the blue/white from the stator to hot wire

 

[DieselTech]

@Wrench might be able to help you. I would have to look at a wiring schematic to give you the answer you are looking for.

 

[DieselTech]

@Wrench might be able to help you. I would have to look at a wiring schematic to give you the answer you are looking for.

Lmao he beat me to it!!!

 

[Wrench]

Maybe ya just want the basic wiring harness Ask Paul if ya need any adapters for your 1999

Base wire harness for Re pro Whizzers - Whizzer Cruzzer Parts

Here is a base wire harness . This is for the person that just wants to run the engine and No accessories . You just plug into the alternator and a voltage regulator and the coil. No key switch , lights or battery. to run the engine .

whizzercruzzerparts.com