Whizzer relay amperage?

[KB4]

Howdy! I recently was given a whizzer and I’ve been working on it. One problem I’ve ran into is that the blinkers aren’t, well, blinking. I’ve changed the flasher, but I’m still needing to change the relay. That’s where my problem arises. My relay doesn’t specify the amperage, and no other forum seems to have an answer. Now I don’t have the manual so I can’t see it from there.

If anyone could help me either figure out the amps, find a replacement, or a copy, I’d be very appreciative! Also I believe the model is a whizzer panther ‘03

 

[Wrench]

It's just a regular 12v flasher like you would find in a 1970 Mustang

 

[Risk Man]

Howdy! I recently was given a whizzer and I’ve been working on it. One problem I’ve ran into is that the blinkers aren’t, well, blinking. I’ve changed the flasher, but I’m still needing to change the relay. That’s where my problem arises. My relay doesn’t specify the amperage, and no other forum seems to have an answer. Now I don’t have the manual so I can’t see it from there.

If anyone could help me either figure out the amps, find a replacement, or a copy, I’d be very appreciative! Also I believe the model is a whizzer panther ‘03

Not sure what you mean by the "Relay". As wrench mentioned ( and you stated) the "flasher" is all you need to replace and or confirm that it is working. Also, if the bike is not running ( or in some cases idling) and the battery is old or not fully charged, the horn and or turn signals may not work properly as the stator does not put out a large amount of power (65 watts max)