DieselTech
Well-Known Member
- Local time
- 4:18 AM
- Joined
- Sep 18, 2021
- Messages
- 7,048
Smooth like a babies butt!!! The texture comes into play if you grind on it. Its 3/8" thick, glass slick on both sides.Is it smooth or textured?
Smooth like a babies butt!!! The texture comes into play if you grind on it. Its 3/8" thick, glass slick on both sides.Is it smooth or textured?
Yeah, that's the stuff Diesel has, Canvas Phenolic BoardIs this the same material as that ? I thought I could make something for the 2 smoker...
Yeah like Wrench said! I would get this from when I worked at Caterpillar, when they rebuilt generator sets, this was the mother board so to speak. All the delicate electrical devices were attached to these big phenolic sheets. It also makes nice knife handles & gun grips.Yeah, that's the stuff Diesel has, Canvas Phenolic Board
Phonelic Board is a resin with layers of material
The finer the material in the board the finer it can be machined
The most common is Phonelic board with canvas
Phenolic Board comes in different thickness up to 1" thick, maybe thicker
I have Canvass Phenolic with a 1/16" thickness on my Whizzer It's used as a carb heat insulation plate
If I had a piece 1" thick I would of made the intake spacer out of it instead of using aluminum
A thin type of Phenolic board is also used in electronics
Yeah like Wrench said! I would get this from when I worked at Caterpillar, when they rebuilt generator sets, this was the mother board so to speak. All the delicate electrical devices were attached to these big phenolic sheets. It also makes nice knife handles & gun grips.
If I had a mill, I could make them.40mm saw carb adapters is what I'm thinking...
Looks like she would be in trouble if she fell off those heels!I always like riding my Whizzer to car shows
Toady was the Temecula Rod Run
Where ever I park my Whizzer she becomes part of the show.
View attachment 173929
All's they need is some goldfish in emLooks like she would be in trouble if she fell off those heels!