Going to figure mounting for an 80cc on this Micro bike. Just laid mother on to see what it looks like. Would a jackshaft even work? Alot of people weld a go ped motor mount and use go ped engine. Trying to avoid all that. What do you guys think??
Definitely going to need a jackshaft since it has a rear shock and I don't think there would be a way to mount a left side sprocket on the wheel. I doubt any of the kits will work, you will probably need to make your own using pillow block bearings, shaft and some steel plate.
Dude you're nuts! Lol when I was a teenager like 13 years ago I was really into Gopeds. They had similar wheels, and I ate s**t so many times. Wheels are so small they don't like rolling over stuff. So smallest crack in the sidewalk would send me over the handlebars. So be careful whatever you do.
Dude you're nuts! Lol when I was a teenager like 13 years ago I was really into Gopeds. They had similar wheels, and I ate sh*t so many times. Wheels are so small they don't like rolling over stuff. So smallest crack in the sidewalk would send me over the handlebars. So be careful whatever you do.
Here's what I think, get rid of the cranks and make that your jackshaft. Extend the rear drop out and some longer forks and some scooter wheels. Those plastic wheels aren't going to be able to take much. You'll need a handlebar tank.