Windowed piston

[Mossy]

Who makes that 1, & what are them 2 aluminum plates on the side for? Plates on right side of pic?

The 070....

 

[Mossy]

Oklahoma... Must be something in the water... Don grubees buddy...

 

[Mossy]

What do I need to know to make a windowed piston for a reed valve engine build? Like window location, window size, shape of window? I'm planning on using a 49mm steel sleeve cylinder & either g2 reeds or the cdh oz reed set up. Any help or ideas would be appreciated.

MB rebel got the windowed coaster brake sprockets...

 

[Nickt919]

MB rebel got the windowed coaster brake sprockets...

That gear will pass over the brake arm. No need to remove it. I've been cutting my gear hole bigger..2" hole saw. I made a crude jig to guide the pilot bit so the cut is centered.

 

[Mossy]

That gear will pass over the brake arm. No need to remove it. I've been cutting my gear hole bigger..2" hole saw. I made a crude jig to guide the pilot bit so the cut is centered.

And a NOS Bendix... The grease is 60years old and needs a repacking...

 

[Mossy]

That gear will pass over the brake arm. No need to remove it. I've been cutting my gear hole bigger..2" hole saw. I made a crude jig to guide the pilot bit so the cut is centered.

I've screwed the sprocket to a piece of plywood found center and used a hole saw... I've flattened out the dust cover an run it on the outside of the kit sprocket also

 

[Karl Snarl]

Isnt it funny an old man like me just pulls this stuff so easily right out of my backside like this ???...lol...lol.

I thought I smelled something funny......lol

 

[Karl Snarl]

When I first saw these evil bike motors, I was thinking I could lose some poundage. Then I started spending to much. An now I have way to much CG stuff to be called normal. 8 cg and more parts than a hobo can shake his stick at. Spend money, you lose weight, from the wallet and lack the f food!!

 

[DieselTech]

When I first saw these evil bike motors, I was thinking I could lose some poundage. Then I started spending to much. An now I have way to much CG stuff to be called normal. 8 cg and more parts than a hobo can shake his stick at. Spend money, you lose weight, from the wallet and lack the f food!!

Lol if you ever wiped out? From lack of food & delirious, You loose a little weight there to, from butt skin transfer to road & the brown streak that appears in your shorts. So it's a Win Win!!!

 

[Potato_In_Exhaust]

Cheaper than the CDH stock ones and 6mm bolts... And it's got the clear Reid I was looking for...

Will these fit the fat DIO reed cylinder? Can't seem to find reeds for it.